Acid solution
Chemical surface modification of titanium by acid solution process [Volume 1, Issue 1, 2012, Pages 59-68]
Adsorption
The Effect of Kernel on the prediction of Energy Distribution
Function in a Heterogeneous Solid Adsorbent [Volume 1, Issue 1, 2012, Pages 69-78]
Adsorption Isotherm
The Effect of Kernel on the prediction of Energy Distribution
Function in a Heterogeneous Solid Adsorbent [Volume 1, Issue 1, 2012, Pages 69-78]
Al - 4.5 wt% Cu
Synthesis of Al-4.5wt%Cu/TiC Nanocomposite and Nanostructured Al-4.5wt%Cu Alloy via Mechanical Milling Process [Volume 1, Issue 1, 2012, Pages 9-14]
Al and TiO2 powders
Parameters Affecting the Mechanochemical Synthesis of
Ti-Al-Al2O3 Composites from Al and TiO2 powders [Volume 1, Issue 2, 2012, Pages 69-78]
Alumina
Synthesis of Al2O3 – ZrO2 nanocomposite By Mechanical Activated Self-propagating High-temperature Synthesis with thermal explosion mode [Volume 1, Issue 2, 2012, Pages 43-51]
Alumina-Magnesia
Effect of using phosphate bonds in alumina-spinel low cement castables [Volume 1, Issue 1, 2012, Pages 1-7]
Alumina-Silicon carbide
The Effect of Deflocculants Type and SiC Content on the Properties of Al2O3-SiC Low-Cement Vibration Refractory Castables [Volume 1, Issue 2, 2012, Pages 79-86]
Aluminum nitride
Thermokinetic investigation of the oxidation of aluminum nitride powder [Volume 1, Issue 2, 2012, Pages 53-60]
B
Band gap
Nano Crystallites of Nickel Tungstate photocatalyst synthesized Via Polyol Method [Volume 1, Issue 2, 2012, Pages 37-42]
Bioactive glass particles
Investigation on the effect of chemical composition of the nano particles bioactive glass on the bioactivity behavior in the SiO2-CaO-P2O5 system [Volume 1, Issue 1, 2012, Pages 35-42]
Bioactivity
Investigation on the effect of chemical composition of the nano particles bioactive glass on the bioactivity behavior in the SiO2-CaO-P2O5 system [Volume 1, Issue 1, 2012, Pages 35-42]
Bioceramics
Effect of addition of functionalized nano fiberous Titania on mechanical properties and biocompatibility of light-cure polymeric dental cement based of poly hydroxyethylmethacrylate (PHEMA) [Volume 1, Issue 2, 2012, Pages 61-67]
Bioglass 45S5. Scaffold
Physical and Mechanical properties of a poly-3-hydroxybutyratecoated namocrystalline bioglass 45S5 scaffold for bone tissue engineering [Volume 1, Issue 2, 2012, Pages 87-96]
Biomaterial
Chemical surface modification of titanium by acid solution process [Volume 1, Issue 1, 2012, Pages 59-68]
Bone tissue engineering
Physical and Mechanical properties of a poly-3-hydroxybutyratecoated namocrystalline bioglass 45S5 scaffold for bone tissue engineering [Volume 1, Issue 2, 2012, Pages 87-96]
C
Calcium fluoride
Determination of optimum process condition for synthesis of CaF2 nanopowder by precipitation method with experimental design of Taguchi's method [Volume 1, Issue 2, 2012, Pages 97-104]
Cartesian-staggered grid
Numerical Prediction of Fluid-Elastic Instability in a Normal Triangular Tube Bundle [Volume 1, Issue 2, 2012, Pages 9-35]
Castable
Effect of using phosphate bonds in alumina-spinel low cement castables [Volume 1, Issue 1, 2012, Pages 1-7]
Circular cylinders
Numerical Prediction of Fluid-Elastic Instability in a Normal Triangular Tube Bundle [Volume 1, Issue 2, 2012, Pages 9-35]
Compaction pressure
Production of AlTi porous bodies by SHS [Volume 1, Issue 1, 2012, Pages 51-57]
Composites
Parameters Affecting the Mechanochemical Synthesis of
Ti-Al-Al2O3 Composites from Al and TiO2 powders [Volume 1, Issue 2, 2012, Pages 69-78]
D
Densification Behavior
Characterization of Mo nanopowder prepared by milling/reduction of MoO3 powder [Volume 1, Issue 1, 2012, Pages 79-85]
Dental cement
Effect of addition of functionalized nano fiberous Titania on mechanical properties and biocompatibility of light-cure polymeric dental cement based of poly hydroxyethylmethacrylate (PHEMA) [Volume 1, Issue 2, 2012, Pages 61-67]
Dielectric Constant
Investigation of the effect of Ag doping on electrical and structural properties of Zn ferrite [Volume 1, Issue 2, 2012, Pages 1-7]
E
Electrophoretic deposition
MnCo2O4 coating on SUS 430 ferritic stainless steel by electrophoretic deposition for interconnect applications in solid oxide fuel cells. [Volume 1, Issue 1, 2012, Pages 43-49]
Energy distribution
The Effect of Kernel on the prediction of Energy Distribution
Function in a Heterogeneous Solid Adsorbent [Volume 1, Issue 1, 2012, Pages 69-78]
F
Ferrite
Investigation of the effect of Ag doping on electrical and structural properties of Zn ferrite [Volume 1, Issue 2, 2012, Pages 1-7]
Finite-volume method
Numerical Prediction of Fluid-Elastic Instability in a Normal Triangular Tube Bundle [Volume 1, Issue 2, 2012, Pages 9-35]
Fluid-elastic Instability
Numerical Prediction of Fluid-Elastic Instability in a Normal Triangular Tube Bundle [Volume 1, Issue 2, 2012, Pages 9-35]
Fredholm integral equation
The Effect of Kernel on the prediction of Energy Distribution
Function in a Heterogeneous Solid Adsorbent [Volume 1, Issue 1, 2012, Pages 69-78]
Fusion method
Physical and Mechanical properties of a poly-3-hydroxybutyratecoated namocrystalline bioglass 45S5 scaffold for bone tissue engineering [Volume 1, Issue 2, 2012, Pages 87-96]
G
Glass Ceramic
Nucleating Agents on Crystallization Behavior of Lithium Aluminosilicate (LAS) Glass–Ceramics [Volume 1, Issue 1, 2012, Pages 25-34]
Glass ionomer
Effect of addition of functionalized nano fiberous Titania on mechanical properties and biocompatibility of light-cure polymeric dental cement based of poly hydroxyethylmethacrylate (PHEMA) [Volume 1, Issue 2, 2012, Pages 61-67]
H
Heterogeneous adsorbents
The Effect of Kernel on the prediction of Energy Distribution
Function in a Heterogeneous Solid Adsorbent [Volume 1, Issue 1, 2012, Pages 69-78]
Hydrogen-reduction
Characterization of Mo nanopowder prepared by milling/reduction of MoO3 powder [Volume 1, Issue 1, 2012, Pages 79-85]
I
Interconnect
MnCo2O4 coating on SUS 430 ferritic stainless steel by electrophoretic deposition for interconnect applications in solid oxide fuel cells. [Volume 1, Issue 1, 2012, Pages 43-49]
Kinetics
Thermokinetic investigation of the oxidation of aluminum nitride powder [Volume 1, Issue 2, 2012, Pages 53-60]
L
Light-cure resin
Effect of addition of functionalized nano fiberous Titania on mechanical properties and biocompatibility of light-cure polymeric dental cement based of poly hydroxyethylmethacrylate (PHEMA) [Volume 1, Issue 2, 2012, Pages 61-67]
Light weight concrete
Investigation of Pozzolanic Effect of Micro Silica on light Weight Concretes [Volume 1, Issue 1, 2012, Pages 15-24]
Linear Regularization
The Effect of Kernel on the prediction of Energy Distribution
Function in a Heterogeneous Solid Adsorbent [Volume 1, Issue 1, 2012, Pages 69-78]
Lithium aluminosilicate
Nucleating Agents on Crystallization Behavior of Lithium Aluminosilicate (LAS) Glass–Ceramics [Volume 1, Issue 1, 2012, Pages 25-34]
Low cement
Effect of using phosphate bonds in alumina-spinel low cement castables [Volume 1, Issue 1, 2012, Pages 1-7]
Low-cement
The Effect of Deflocculants Type and SiC Content on the Properties of Al2O3-SiC Low-Cement Vibration Refractory Castables [Volume 1, Issue 2, 2012, Pages 79-86]
Low coefficient of thermal expansion
Nucleating Agents on Crystallization Behavior of Lithium Aluminosilicate (LAS) Glass–Ceramics [Volume 1, Issue 1, 2012, Pages 25-34]
Micro Silica
Investigation of Pozzolanic Effect of Micro Silica on light Weight Concretes [Volume 1, Issue 1, 2012, Pages 15-24]
Milling
Characterization of Mo nanopowder prepared by milling/reduction of MoO3 powder [Volume 1, Issue 1, 2012, Pages 79-85]
Milling
Synthesis of Al2O3 – ZrO2 nanocomposite By Mechanical Activated Self-propagating High-temperature Synthesis with thermal explosion mode [Volume 1, Issue 2, 2012, Pages 43-51]
N
Nanocomposite
Synthesis of Al-4.5wt%Cu/TiC Nanocomposite and Nanostructured Al-4.5wt%Cu Alloy via Mechanical Milling Process [Volume 1, Issue 1, 2012, Pages 9-14]
Nanocomposite
Synthesis of Al2O3 – ZrO2 nanocomposite By Mechanical Activated Self-propagating High-temperature Synthesis with thermal explosion mode [Volume 1, Issue 2, 2012, Pages 43-51]
Nano crystallite
Nano Crystallites of Nickel Tungstate photocatalyst synthesized Via Polyol Method [Volume 1, Issue 2, 2012, Pages 37-42]
Nano powder
Thermokinetic investigation of the oxidation of aluminum nitride powder [Volume 1, Issue 2, 2012, Pages 53-60]
Nanopowder
Characterization of Mo nanopowder prepared by milling/reduction of MoO3 powder [Volume 1, Issue 1, 2012, Pages 79-85]
Nanopowder
Determination of optimum process condition for synthesis of CaF2 nanopowder by precipitation method with experimental design of Taguchi's method [Volume 1, Issue 2, 2012, Pages 97-104]
O
Oxidation Resistance
MnCo2O4 coating on SUS 430 ferritic stainless steel by electrophoretic deposition for interconnect applications in solid oxide fuel cells. [Volume 1, Issue 1, 2012, Pages 43-49]
P
Perlite
Investigation of Pozzolanic Effect of Micro Silica on light Weight Concretes [Volume 1, Issue 1, 2012, Pages 15-24]
Photocatalytic
Nano Crystallites of Nickel Tungstate photocatalyst synthesized Via Polyol Method [Volume 1, Issue 2, 2012, Pages 37-42]
Pozzolan
Investigation of Pozzolanic Effect of Micro Silica on light Weight Concretes [Volume 1, Issue 1, 2012, Pages 15-24]
R
Refractory Castable
The Effect of Deflocculants Type and SiC Content on the Properties of Al2O3-SiC Low-Cement Vibration Refractory Castables [Volume 1, Issue 2, 2012, Pages 79-86]
Sintering
Characterization of Mo nanopowder prepared by milling/reduction of MoO3 powder [Volume 1, Issue 1, 2012, Pages 79-85]
Sol-Gel
Investigation on the effect of chemical composition of the nano particles bioactive glass on the bioactivity behavior in the SiO2-CaO-P2O5 system [Volume 1, Issue 1, 2012, Pages 35-42]
Spinel
MnCo2O4 coating on SUS 430 ferritic stainless steel by electrophoretic deposition for interconnect applications in solid oxide fuel cells. [Volume 1, Issue 1, 2012, Pages 43-49]
Spinel
Investigation of the effect of Ag doping on electrical and structural properties of Zn ferrite [Volume 1, Issue 2, 2012, Pages 1-7]
Surface modification
Chemical surface modification of titanium by acid solution process [Volume 1, Issue 1, 2012, Pages 59-68]
T
Taguchi
Determination of optimum process condition for synthesis of CaF2 nanopowder by precipitation method with experimental design of Taguchi's method [Volume 1, Issue 2, 2012, Pages 97-104]
Thermal shock resistance
Nucleating Agents on Crystallization Behavior of Lithium Aluminosilicate (LAS) Glass–Ceramics [Volume 1, Issue 1, 2012, Pages 25-34]
Thermogravimetry
Thermokinetic investigation of the oxidation of aluminum nitride powder [Volume 1, Issue 2, 2012, Pages 53-60]
Titania
Effect of addition of functionalized nano fiberous Titania on mechanical properties and biocompatibility of light-cure polymeric dental cement based of poly hydroxyethylmethacrylate (PHEMA) [Volume 1, Issue 2, 2012, Pages 61-67]
Titanium
Chemical surface modification of titanium by acid solution process [Volume 1, Issue 1, 2012, Pages 59-68]
Tube bundles
Numerical Prediction of Fluid-Elastic Instability in a Normal Triangular Tube Bundle [Volume 1, Issue 2, 2012, Pages 9-35]
V
Vibrocast
The Effect of Deflocculants Type and SiC Content on the Properties of Al2O3-SiC Low-Cement Vibration Refractory Castables [Volume 1, Issue 2, 2012, Pages 79-86]
Z
Zirconia
Synthesis of Al2O3 – ZrO2 nanocomposite By Mechanical Activated Self-propagating High-temperature Synthesis with thermal explosion mode [Volume 1, Issue 2, 2012, Pages 43-51]